MASTER ALLOYS chemicals manufacturers in India
ECO - MASTER ALLOY
- ECO – ALTi5B1 (ALUMINIUM TITANIUM BORON)
- ECO – ALSR 5%, 10% & 15% (ALUMINIUM STRONTIUM)
- ECO – ALTi 5%, 10% ( ALUMINIUM TITANIUM)
- ECO – ALMn 10% & 15% (ALUMINIUM MAGANESE)
- ECO – ALSi 30% (ALUMINIUM SILICON)
- ECO – BORON 8% & 10% (ALUMINIUM BORON)
- ECO – ALCr 10% (ALUMINIUM CHROMIUM)
Advantages :
- Improvement in mechanical and metallurgical properties
- Anti-decay properties
- Stability in remelting
- Easy to use with no pollution problems
- No storage and handling problems
- Excellent tensile & ductile strength due to uniform distribution of silicon grains
- No impurity added into the melt
Instructions for use :
1. Prepare the required alloy composition. Follow the normal fluxing and cleaning procedure asrecommended.
2. Degas the melt with tablet ECO – degaser or by mobile degassing unit and dross off by usingsmall quantity of ECO – coverflux.
3. After the degassing operation, add ECO-Alti5B1 grain refiner at an application rate of 0.20 to0.40 by weight at temperature between 700-750 Deg C.
4. Add ECO – ALSR at an application rate of 0.20 – 0.40 at a temperature between 700 to 750deg C.
5. Rabble the melt to ensure homogeneity, wait for 5 to 10 min. then use
General Description:
ECO – ALSR is an excellent modifying agent for aluminium and its alloys. It is used to refine thegrains of silicon in the alloy, improve the mechanical capacity of the alloy and provide stability in remelting.
The purpose of modifying eutectic and hypoeutectic Al-Si alloys is to change the circular form ofsilicon to spheroids or globular form results in improved mechanical properties.
ECO - ALTi5B1 (ALUMINIUM TITANIUM BORON)
ECO - ALSR 5%, 10% & 15% (ALUMINIUM STRONTIUM)
ECO - ALTi 5%, 10% ( ALUMINIUM TITANIUM)
ECO - ALMn 10% & 15% (ALUMINIUM MAGANESE)
ECO - ALSi 30% (ALUMINIUM SILICON)
ECO - BORON 8% & 10% (ALUMINIUM BORON)